114 Standards SAE J2933_202209
Verification of Brake Rotor and Drum Modal Frequencies
standard by SAE International, 09/08/2022
Author Archives: admin
114 Standards SAE AS6976/5
SLEEVING, IDENTIFICATION, HEAT SHRINKABLE, 125 oC AND 135 oC, POLYOLEFIN, FLEXIBLE, CROSSLINKED
standard by SAE International, 12/07/2022
114 Standards SAE AMS5713L
Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings, 53Ni – 19Cr – 11Co – 9.8Mo – 3.2Ti – 1.6Al – 0.006B, Vacuum Melted, Solution and Precipitation Heat Treated
standard by SAE International, 08/17/2022
114 Standards SAE AS60500AR-4
AS60500-599AR Amendment Record for Aerospace Standard No. AS60500-599
standard by SAE International, 10/26/2022
114 Standards SAE AS5443C
WRENCHING ELEMENT SPLINE DRIVE – DIMENSIONS FOR(STABILIZED Dec 2022)
standard by SAE International, 12/07/2022
114 Standards SAE AIR5691B
Guidance for the Design and Installation of Fuel Quantity Indicating Systems (FQIS)
standard by SAE International, 10/07/2022
114 Standards SAE AMS4940D
Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield Strength
standard by SAE International, 03/01/2023
114 Standards SAE AS85421/15D
FITTING, ELBOW, 45o, BEAM SEAL, 3000/4000 PSI, BULKHEAD, MALE ENDS
standard by SAE International, 10/26/2022
114 Standards SAE J2601/3_202209
Fueling Protocol for Gaseous Hydrogen Powered Industrial Trucks
standard by SAE International, 09/16/2022
114 Standards SAE AMS4374A
Aluminum Alloy, Extruded Profiles 8.9Zn – 2.2Cu – 2.2Mg – 0.15Zr (7136-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged
standard by SAE International, 11/02/2022