114 Standards SAE AMS2420F
Plating of Aluminum for Solderability Zinc Immersion Pre-Treatment Process
standard by SAE International, 07/19/2022
Author Archives: admin
114 Standards SAE J2953/1_202305
Plug-In Electric Vehicle (PEV) Interoperability with Electric Vehicle Supply Equipment (EVSE)
standard by SAE International, 05/24/2023
114 Standards SAE 9990/1
Transmitted Enhanced Loran (eLoran) Signal Standard for Tri-State Pulse Position Modulation
standard by SAE International, 09/17/2018
114 Standards SAE 1008
Standard Practice for Force Protection and Survivability
standard by SAE International, 02/14/2022
114 Standards SAE AS9732C
BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, UNS S17400, .1900-32 UNJF-3A
standard by SAE International, 03/20/2023
114 Standards SAE AS7458C
Studs, Steel, Low Alloy, Heat-Resistant Normalized and Tempered, Roll Threaded 135000 psi Tensile Strength
standard by SAE International, 07/06/2022
114 Standards SAE AMS4118M
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu – 0.70Mn – 0.60Mg – 0.50Si (2017; -T4, -T451) Solution Heat Treated
standard by SAE International, 07/06/2022
114 Standards SAE J3094_202302
Test Procedure for Internal Heat Exchangers of Mobile Air-Conditioning Systems with R-134a or R-1234yf Refrigerant
standard by SAE International, 02/14/2023
114 Standards SAE USCAR46
ENGINE OIL PUMP PERFORMANCE AND DURABILITY TEST PROCEDURES
standard by SAE International, 03/23/2023
114 Standards SAE AS4662C
FITTING, PLUG, SHORT FLARELESS
standard by SAE International, 08/16/2023