SAE J1930DA 202301
Continuation of the digital annex of terms and definitions for use by scantools and maintain alignment of terms with other committees such as J2012, J1979, J1939 etc. and with regulatory bodies.
114 Standards SAE AMS2420F
Plating of Aluminum for Solderability Zinc Immersion Pre-Treatment Process
standard by SAE International, 07/19/2022
114 Standards SAE J2953/1_202305
Plug-In Electric Vehicle (PEV) Interoperability with Electric Vehicle Supply Equipment (EVSE)
standard by SAE International, 05/24/2023
114 Standards SAE 9990/1
Transmitted Enhanced Loran (eLoran) Signal Standard for Tri-State Pulse Position Modulation
standard by SAE International, 09/17/2018
114 Standards SAE 1008
Standard Practice for Force Protection and Survivability
standard by SAE International, 02/14/2022
114 Standards SAE AS9732C
BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, UNS S17400, .1900-32 UNJF-3A
standard by SAE International, 03/20/2023
114 Standards SAE AS7458C
Studs, Steel, Low Alloy, Heat-Resistant Normalized and Tempered, Roll Threaded 135000 psi Tensile Strength
standard by SAE International, 07/06/2022
114 Standards SAE AMS4118M
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu – 0.70Mn – 0.60Mg – 0.50Si (2017; -T4, -T451) Solution Heat Treated
standard by SAE International, 07/06/2022
114 Standards SAE J3094_202302
Test Procedure for Internal Heat Exchangers of Mobile Air-Conditioning Systems with R-134a or R-1234yf Refrigerant
standard by SAE International, 02/14/2023
114 Standards SAE USCAR46
ENGINE OIL PUMP PERFORMANCE AND DURABILITY TEST PROCEDURES
standard by SAE International, 03/23/2023
114 Standards SAE AS4662C
FITTING, PLUG, SHORT FLARELESS
standard by SAE International, 08/16/2023