SAE J1930DA 202301
Continuation of the digital annex of terms and definitions for use by scantools and maintain alignment of terms with other committees such as J2012, J1979, J1939 etc. and with regulatory bodies.
114 Standards SAE MAM6415C
Steel, Bars, Forgings, and Tubing, 0.80cr 1.8ni 0.25mo (0.38 0.43)
standard by SAE International, 03/12/2003
114 Standards SAE SAE1002
U.S. National Grid Standard
standard by SAE International, 08/22/2018
114 Standards SAE TS250AR-2
Amendment Record for Technical Specification No. TS250
standard by SAE International, 04/07/2016
114 Standards SAE USCAR12-5
Electrical Connector Design Criteria
standard by SAE International, 08/17/2017
114 Standards SAE J748_201410
Hydraulic Directional Control Valves, 3000 PSI Maximum
standard by SAE International, 10/24/2014
114 Standards SAE J774_201102
Emergency Warning Device and Emergency Warning Device Protective Container (Stabilized: Feb 2011)
standard by SAE International, 02/01/2011
114 Standards SAE J861_201208
Method of Testing Resistance to Crocking of Organic Trim Materials
standard by SAE International, 08/24/2012
114 Standards SAE J863_198606
Methods for Determining Plastic Deformation in Sheet Metal Stampings
standard by SAE International, 06/01/1986
114 Standards SAE J914_201408
Side Turn Signal Lamps for Vehicles Less than 12 m in Length Superseding J914 SEP2009
standard by SAE International, 08/01/2014
114 Standards SAE J973_201306
Ignition System Measurements Procedure (Stabilized: Jun 2013)
standard by SAE International, 06/19/2013