SAE J1930DA 202301
Continuation of the digital annex of terms and definitions for use by scantools and maintain alignment of terms with other committees such as J2012, J1979, J1939 etc. and with regulatory bodies.
114 Standards SAE J391_198107
Definition for Particle Size
standard by SAE International, 07/01/1981
114 Standards SAE J4004_200808
Positioning the H-Point Design Tool¿¿¿Seating Reference Point and Seat Track Length
standard by SAE International, 08/29/2008
114 Standards SAE J441_201310
Cut Wire Shot
standard by SAE International, 10/16/2013
114 Standards SAE J492_201304
Guide for Rivet Selection and Design Consideration Superseding J492 JUN2005
standard by SAE International, 04/01/2013
114 Standards SAE J492_201304
Guide for Rivet Selection and Design Consideration
standard by SAE International, 04/16/2013
114 Standards SAE J592C_196811
Sidemarker Lamps for Use on Road Vehicles Less than 2032 mm in Overall Width
standard by SAE International, 11/01/1968
114 Standards SAE J594_201002
Reflex Reflectors
standard by SAE International, 02/18/2010
114 Standards SAE J602_201102
Headlamp Aiming Device for Mechanically Aimable Headlamp Units (Stabilized: Feb 2011)
standard by SAE International, 02/24/2011
114 Standards SAE J714B_197509
Wheel Mounting Elements for Industrial and Agricultural Disc Wheels
standard by SAE International, 09/01/1975
114 Standards SAE J753_201110
Maintenance Interval Chart
standard by SAE International, 10/27/2011