SAE J1930DA 202301
Continuation of the digital annex of terms and definitions for use by scantools and maintain alignment of terms with other committees such as J2012, J1979, J1939 etc. and with regulatory bodies.
114 Standards SAE AS5729B
O-RING MOLDED FROM AMS7379 FLUOROCARBON (FKM) MATERIAL
standard by SAE International, 06/06/2023
114 Standards SAE AIR984D
Air Bleed Objective for Rotorcraft Turbine Engines
standard by SAE International, 05/10/2023
114 Standards SAE AS1390A
Level of Repair Analysis (LORA)
standard by SAE International, 04/04/2023
114 Standards SAE AIR1419D
Inlet Total-Pressure Distortion Considerations for Gas-Turbine Engines
standard by SAE International, 08/01/2023
114 Standards SAE ARP994C
Design of Tubing Installations for Aerospace Hydraulic Systems
standard by SAE International, 06/27/2023
114 Standards SAE J141_202207
Seat Belt Hardware Performance Requirements (Stabilized: Jul 2022)
standard by SAE International, 07/08/2022
114 Standards SAE AMS5564D
Steel, Corrosion Resistant, Tubing 19Cr – 10Ni High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless Cold Drawn, One Eighth – Hard Temper
standard by SAE International, 05/10/2023
114 Standards SAE J3094_202302
Test Procedure for Internal Heat Exchangers of Mobile Air-Conditioning Systems with R-134a or R-1234yf Refrigerant
standard by SAE International, 02/14/2023
114 Standards SAE AMS4079J
Aluminum Alloy, Drawn, Round, Seamless, Tubing 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-O) Close Tolerance, Annealed
standard by SAE International, 08/01/2023
114 Standards SAE AS1582G
FITTING, ADAPTER, EXTERNAL THREAD FLARELESS TO INTEGRAL WELD RING, 3000 PSI
standard by SAE International, 06/12/2023