SAE J1930DA 202301
Continuation of the digital annex of terms and definitions for use by scantools and maintain alignment of terms with other committees such as J2012, J1979, J1939 etc. and with regulatory bodies.
114 Standards SAE AMS4028J
Aluminum Alloy Sheet and Plate 4.4Cu – 0.85Si – 0.80Mn – 0.50Mg (2014-O) Annealed
standard by SAE International, 07/06/2022
114 Standards SAE AS9349B
CLAMP, LOOP, CUSHIONED, JOGGLED, CRES, .204 HOLE (Stabilized: Jul 2023)
standard by SAE International, 07/06/2023
114 Standards SAE AS21944C
BODY, CLUSTER FITTING, TWO WAY, 180°, FLARELESS
standard by SAE International, 07/24/2023
114 Standards SAE J2789_202304
Inertia Calculation for Single-Ended Inertia-Dynamometer Testing (Stabilized: Apr 2023)
standard by SAE International, 04/12/2023
114 Standards SAE AS9102C
Aerospace Series – First Article Inspection Requirements
standard by SAE International, 06/28/2023
114 Standards SAE AS4405B
FITTING ASSEMBLY, ADAPTER, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
standard by SAE International, 04/04/2023
114 Standards SAE J2383_202305
Air Dryer Installation Procedure
standard by SAE International, 05/24/2023
114 Standards SAE ARP4457A
Torsion Strength Testing of Hydraulic Tube Joints (Stabilized: Jul 2023)
standard by SAE International, 07/06/2023
114 Standards SAE AS9557F
BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, UTS 130 KSI MIN, .2500-28 UNJF-3A
standard by SAE International, 04/21/2023
114 Standards SAE AMS5629/H1100
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr – 8.0Ni – 2.2Mo – 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H1100)
standard by SAE International, 03/23/2023